Design
Flag labels: construction, sewing and design
A small label folded in half and sewn into an outside seam: how it is built, where it goes and how to prepare the artwork.

A flag label (side-seam label, tab label) is a small label made from a tape folded in half and sewn into a seam so that the folded part sticks out on the outside of the product. An ordinary sew-in label sits inside the garment. A flag label is visible in wear and works as a brand mark.
Construction
A flag label is made from a length of narrow tape, most often woven. The length is folded at its midpoint and both free ends go into the seam together. After sewing, a loop with two visible faces remains on the outside. The side edges are the edges of the tape, so they need no hemming.
The overall length is twice the visible length plus the allowance hidden in the seam. The allowance is agreed with the sewing room, because it depends on the type of seam and the thickness of the fabric.
Where it is sewn in
- in the side seam of T-shirts, sweatshirts and dresses, usually low, near the hem;
- in the edge of a pocket on trousers and jackets;
- in the edge of a sleeve or cuff;
- in a seam of hats, bags, backpacks and bum bags;
- in cushions, blankets and soft toys.
A design seen from both sides
A flag label is seen from both sides, so the artwork is prepared for the whole unfolded length. Three layouts are common:
- the same logo on both halves, turned on one of them so that it reads correctly from either side after folding;
- the logo on one side and the size, web address or a short text on the other;
- a plain brand colour with no lettering, recognisable on its own.
The mark should sit within the visible part, clear of the fold line and of the seam. At such a small size lettering is simplified and the number of colours is kept low. Legibility is discussed in How to design a custom woven label.
Options
| Option | Features | Where it works best |
|---|---|---|
| Woven (jacquard) | The design is woven from yarn and shows on both sides of the tape. Woven, soft edges. | A brand mark on clothing that will be washed often. |
| Printed | A print on a finished tape, with full freedom for small text. | Short runs, variable text, lower cost. |
| Decorative tape | A ready-made tape in one colour or with stripes, without a logo. | A colour accent for a collection. |
Woven-label technology is described in Woven labels: how a jacquard label is made, and printed labels in Printed labels.
Flag labels and other sew-in labels
A flag label differs from an ordinary centre-fold label only in where and how it is sewn in: the construction is the same, but the loop comes out on the right side of the product. This is why the look of both faces of the tape and of its edges matters. The other types are reviewed in Clothing labels: types, functions and legal requirements.
Frequently asked questions
What is a flag label?
A small label made from a tape folded in half and sewn into an outside seam, so that a loop with the logo shows on the outside of the garment.
Where are flag labels sewn in?
Most often in the side seam of T-shirts and sweatshirts, in the edge of a pocket or sleeve, and in hats, bags and home textiles.
Does the logo have to be on both sides?
It does not, but both sides are visible. The usual choice is a logo on both sides, or a logo on one side and a short text on the other.
How is the size of a flag label specified?
By the width of the tape and the length of the part visible after folding. The seam allowance is agreed separately.
Sources
- Construction and sewing methods: common practice in label finishing